
SuperFOIL Insulation in Aberdare
Aberdare's larger Victorian houses often have attic rooms or tall lofts in use, and multifoil on the rafters keeps them warm without losing headroom.
View serviceLoft-insulation assessments, quotations and installation across Cardiff and South Wales.
Aberdare, Rhondda Cynon Taf
Aberdare is the main town of the Cynon Valley, and its housing is more varied than in many valley towns: hillside terraces, a good number of large Victorian and Edwardian houses, and sizeable estates from the post-war decades. We fit loft insulation in Aberdare across all of them.
Our team travels from Cardiff up the A470 and the A4059, so a survey takes a little planning but no more than that. You'll get a clear written quote, usually within 24 hours, and most jobs are done in a day.
Aberdare grew on coal and iron in the 1800s, and those who did well from it built substantial houses around the town centre and Aberdare Park. Many have tall roofs, attic rooms or big open lofts, and some still have their original lath-and-plaster ceilings below.
Around them, and up both sides of the valley towards Trecynon, Cwmbach and Abernant, are the long stone terraces typical of the coalfield, with small lofts and slate roofs. Further out, estates built from the 1950s to the 1970s brought semis and short terraces with lower-pitched roofs and simpler loft spaces.
That spread means there's no single Aberdare loft. A villa with an attic room needs a very different plan from a 1960s semi, and we price each one on what's actually up there.

Aberdare's larger Victorian houses often have attic rooms or tall lofts in use, and multifoil on the rafters keeps them warm without losing headroom.
View service
Terraces and post-war semis around the town usually need a straightforward top-up to 270mm in mineral wool, laid evenly right out to the eaves.
View service
Where a big period loft is used for storage, raised boards give a solid floor without flattening the insulation beneath it.
View serviceThe town centre is a conservation area, but insulating inside a loft doesn't change the outside of a house and normally needs no consent. Listed buildings are different, so tell us if yours is listed. Hillside streets often mean parking on a gradient, which we sort out when we book. In the bigger period houses, the loft hatch is sometimes tucked into a bedroom cupboard or a back landing, so let us know where yours is when you call.
If you're weighing up rafter-level multifoil against loft roll, our SuperFOIL vs mineral wool comparison sets out the trade-offs, and our loft boarding service explains how raised boards are fitted.
Yes. Attic rooms usually have three parts to deal with: the sloping ceilings, the short knee walls and the small voids behind and above them. We fit SuperFOIL to the rafters where the room is used and insulate the voids we can reach. The aim is a warm room without losing headroom, and we check access and existing finishes at the survey.
The widely recommended depth for mineral wool in a loft is 270mm. Houses of that era were often built with very little, and early insulation will have flattened over time. We measure what's there, then top it up with Knauf Earthwool, laying the second layer across the joists so there are no cold strips.
Yes. Our team travels from Cardiff up the A470 and into the Cynon Valley. We agree a survey time that suits you, including Saturdays, as we work Monday to Saturday from 8am to 6pm. Once you've accepted the quote, we book the installation in.
Yes, with care. Old lath and plaster becomes brittle, and a misplaced knee between the joists or a heavy point load can crack it or break the plaster keys. We lay crawl boards across the joists, keep materials spread out and use lightweight mineral wool. If we spot existing cracks or sagging, we point them out before any work starts.
Free, no obligation
Tell us about your property and we will review your loft requirements, then provide a written recommendation and quotation before any work begins.